Flue Gas Combustion Analyzer (Analyser) LMBD3 shows the result on LEDs on the front panel. LEDs correspond to the Lambda measurements from 1.1 to 1.5.
Flue Gas Combustion Analyzer (Analyser) LMBD3 is designed to use the cheapest type of automotive lambda probe (the same type that is used in cars, ZrO2 Zirconium dioxide, 4 wire, heated, thimble type) that you install in your chimney/vent/flue gas path and connect electrically to the device. You use an USB cable to connect the device to a laptop.
After setting appropriate parameters and disconnecting the device from the laptop, the device will measure on-the-fly whether or not the combustion parameters are correct and shows the result on LEDs on the front panel. LEDs correspond to the Lambda measurements from 1.1 to 1.5.
Combustion Analyzer (Analyser) LMBD3 is also equipped with a 7day timer which you can use to set up the operation of e.g. a water circulation pump.
Flue Gas Combustion Analyzer LMBD3 comes with a power-supply unit, an USB cable, a CD with software, drivers and a manual, and a nut (thread 18mm x 1.5mm) made from stainless steel used to install the lambda probe. The lambda probe and the flue gas temperature sensor are not included in the package.
The benefits of setting up the boiler or furnace properly can be seen almost instantly. It allows you to save a really big amount of fuel during the heating season if you keep lambda/oxygen level in the exhaust flue stream not too high. Also using this device is very cheap as you only need an universal lambda probe and a Pt-100 platinum resistor temperature sensor that are available cheaply on various Internet auctions but you are then responsible to calibrate them yourself.

Remember that you have to adjust combustion parameters every time when you fill your tanks with new fuel delivery and every cleaning/maintenance or even every some days when atmospheric pressure and humidity change.

2010-08-02 - NEW Software: http://www.elkom.com.tw/files/fw3/lmbd_v3_191.zip
This software will not work with older firmware. You must update firmware to 3.0 in order to use this software. Enjoy...

Firmware for blue PCB: http://www.elkom.com.tw/files/fw3/lmbd3_update_blue_300.zip
Firmware for green PCB: http://www.elkom.com.tw/files/fw3/lmbd3_update_green_300.zip
How to update: http://www.elkom.com.tw/files/fw3/Firmware_update_manual_v10.pdf
[PL] Jak aktualizowac: http://www.elkom.com.tw/files/fw3/Aktualizacja_firmware_instrukjcja_v10.pdf

New User Guide: soon...

Shipment from Poland to the EU and Switzerland  -  15 € ( $ 20 )
Shipment from Poland to the US/ Canada/ Mexico  -  30 € ( $ 40 )
We ship worldwide - please contact us for additional shipping costs and services.

We accept PayPal payments.
We also accept IBAN ( bank to bank ) transfer